/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* vim: set sw=2 ts=8 et ft=cpp : */
/* This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this file,
 * You can obtain one at http://mozilla.org/MPL/2.0/. */

#ifndef mozilla_Hal_h
#define mozilla_Hal_h

#include "mozilla/hal_sandbox/PHal.h"
#include "base/basictypes.h"
#include "mozilla/Types.h"
#include "nsTArray.h"
#include "prlog.h"
#include "mozilla/dom/battery/Types.h"
#include "mozilla/dom/network/Types.h"
#include "mozilla/dom/power/Types.h"
#include "mozilla/hal_sandbox/PHal.h"
#include "mozilla/dom/ScreenOrientation.h"

/*
 * Hal.h contains the public Hal API.
 *
 * By default, this file defines its functions in the hal namespace, but if
 * MOZ_HAL_NAMESPACE is defined, we'll define our functions in that namespace.
 *
 * This is used by HalImpl.h and HalSandbox.h, which define copies of all the
 * functions here in the hal_impl and hal_sandbox namespaces.
 */

class nsIDOMWindow;

#ifndef MOZ_HAL_NAMESPACE
# define MOZ_HAL_NAMESPACE hal
# define MOZ_DEFINED_HAL_NAMESPACE 1
#endif

namespace mozilla {

template <class T>
class Observer;

namespace hal {

typedef Observer<void_t> AlarmObserver;
typedef Observer<ScreenConfiguration> ScreenConfigurationObserver;

class WindowIdentifier;

extern PRLogModuleInfo *sHalLog;
#define HAL_LOG(msg) PR_LOG(mozilla::hal::sHalLog, PR_LOG_DEBUG, msg)

typedef Observer<SystemTimeChange> SystemTimeObserver;

} // namespace hal

namespace MOZ_HAL_NAMESPACE {

/**
 * Turn the default vibrator device on/off per the pattern specified
 * by |pattern|.  Each element in the pattern is the number of
 * milliseconds to turn the vibrator on or off.  The first element in
 * |pattern| is an "on" element, the next is "off", and so on.
 *
 * If |pattern| is empty, any in-progress vibration is canceled.
 *
 * Only an active window within an active tab may call Vibrate; calls
 * from inactive windows and windows on inactive tabs do nothing.
 *
 * If you're calling hal::Vibrate from the outside world, pass an
 * nsIDOMWindow* in place of the WindowIdentifier parameter.
 * The method with WindowIdentifier will be called automatically.
 */
void Vibrate(const nsTArray<uint32_t>& pattern,
             nsIDOMWindow* aWindow);
void Vibrate(const nsTArray<uint32_t>& pattern,
             const hal::WindowIdentifier &id);

/**
 * Cancel a vibration started by the content window identified by
 * WindowIdentifier.
 *
 * If the window was the last window to start a vibration, the
 * cancellation request will go through even if the window is not
 * active.
 *
 * As with hal::Vibrate(), if you're calling hal::CancelVibrate from the outside
 * world, pass an nsIDOMWindow*. The method with WindowIdentifier will be called
 * automatically.
 */
void CancelVibrate(nsIDOMWindow* aWindow);
void CancelVibrate(const hal::WindowIdentifier &id);

/**
 * Inform the battery backend there is a new battery observer.
 * @param aBatteryObserver The observer that should be added.
 */
void RegisterBatteryObserver(BatteryObserver* aBatteryObserver);

/**
 * Inform the battery backend a battery observer unregistered.
 * @param aBatteryObserver The observer that should be removed.
 */
void UnregisterBatteryObserver(BatteryObserver* aBatteryObserver);

/**
 * Returns the current battery information.
 */
void GetCurrentBatteryInformation(hal::BatteryInformation* aBatteryInfo);

/**
 * Notify of a change in the battery state.
 * @param aBatteryInfo The new battery information.
 */
void NotifyBatteryChange(const hal::BatteryInformation& aBatteryInfo);

/**
 * Determine whether the device's screen is currently enabled.
 */
bool GetScreenEnabled();

/**
 * Enable or disable the device's screen.
 *
 * Note that it may take a few seconds for the screen to turn on or off.
 */
void SetScreenEnabled(bool enabled);

/**
 * Get the brightness of the device's screen's backlight, on a scale from 0
 * (very dim) to 1 (full blast).
 *
 * If the display is currently disabled, this returns the brightness the
 * backlight will have when the display is re-enabled.
 */
double GetScreenBrightness();

/**
 * Set the brightness of the device's screen's backlight, on a scale from 0
 * (very dimm) to 1 (full blast).  Values larger than 1 are treated like 1, and
 * values smaller than 0 are treated like 0.
 *
 * Note that we may reduce the resolution of the given brightness value before
 * sending it to the screen.  Therefore if you call SetScreenBrightness(x)
 * followed by GetScreenBrightness(), the value returned by
 * GetScreenBrightness() may not be exactly x.
 */
void SetScreenBrightness(double brightness);

/**
 * Determine whether the device is allowed to sleep.
 */
bool GetCpuSleepAllowed();

/**
 * Set whether the device is allowed to suspend automatically after
 * the screen is disabled.
 */
void SetCpuSleepAllowed(bool allowed);

/**
 * Set the value of a light to a particular color, with a specific flash pattern.
 * light specifices which light.  See Hal.idl for the list of constants
 * mode specifies user set or based on ambient light sensor
 * flash specifies whether or how to flash the light
 * flashOnMS and flashOffMS specify the pattern for XXX flash mode
 * color specifies the color.  If the light doesn't support color, the given color is
 * transformed into a brightness, or just an on/off if that is all the light is capable of.
 * returns true if successful and false if failed.
 */
bool SetLight(hal::LightType light, const hal::LightConfiguration& aConfig);
/**
 * GET the value of a light returning a particular color, with a specific flash pattern.
 * returns true if successful and false if failed.
 */
bool GetLight(hal::LightType light, hal::LightConfiguration* aConfig);


/**
 * Register an observer for the sensor of given type.
 *
 * The observer will receive data whenever the data generated by the
 * sensor is avaiable.
 */
void RegisterSensorObserver(hal::SensorType aSensor,
                            hal::ISensorObserver *aObserver);

/**
 * Unregister an observer for the sensor of given type.
 */
void UnregisterSensorObserver(hal::SensorType aSensor,
                              hal::ISensorObserver *aObserver);

/**
 * Post a value generated by a sensor.
 *
 * This API is internal to hal; clients shouldn't call it directly.
 */
void NotifySensorChange(const hal::SensorData &aSensorData);

/**
 * Enable sensor notifications from the backend
 *
 * This method is only visible from implementation of sensor manager.
 * Rest of the system should not try this.
 */
void EnableSensorNotifications(hal::SensorType aSensor);

/**
 * Disable sensor notifications from the backend
 *
 * This method is only visible from implementation of sensor manager.
 * Rest of the system should not try this.
 */
void DisableSensorNotifications(hal::SensorType aSensor);


/**
 * Inform the network backend there is a new network observer.
 * @param aNetworkObserver The observer that should be added.
 */
void RegisterNetworkObserver(NetworkObserver* aNetworkObserver);

/**
 * Inform the network backend a network observer unregistered.
 * @param aNetworkObserver The observer that should be removed.
 */
void UnregisterNetworkObserver(NetworkObserver* aNetworkObserver);

/**
 * Returns the current network information.
 */
void GetCurrentNetworkInformation(hal::NetworkInformation* aNetworkInfo);

/**
 * Notify of a change in the network state.
 * @param aNetworkInfo The new network information.
 */
void NotifyNetworkChange(const hal::NetworkInformation& aNetworkInfo);

/**
 * Adjusting system clock.
 * @param aDeltaMilliseconds The difference compared with current system clock.
 */
void AdjustSystemClock(int64_t aDeltaMilliseconds);

/**
 * Set timezone
 * @param aTimezoneSpec The definition can be found in 
 * http://en.wikipedia.org/wiki/List_of_tz_database_time_zones
 */
void SetTimezone(const nsCString& aTimezoneSpec);

/**
 * Get timezone
 * http://en.wikipedia.org/wiki/List_of_tz_database_time_zones
 */
nsCString GetTimezone();

/**
 * Register observer for system time changed notification.
 * @param aObserver The observer that should be added.
 */
void RegisterSystemTimeChangeObserver(hal::SystemTimeObserver* aObserver);

/**
 * Unregister the observer for system time changed.
 * @param aObserver The observer that should be removed.
 */
void UnregisterSystemTimeChangeObserver(hal::SystemTimeObserver* aObserver);

/**
 * Notify of a change in the system cloeck or time zone.
 * @param aReason
 */
void NotifySystemTimeChange(const hal::SystemTimeChange& aReason);

/**
 * Reboot the device.
 * 
 * This API is currently only allowed to be used from the main process.
 */
void Reboot();

/**
 * Power off the device.
 * 
 * This API is currently only allowed to be used from the main process.
 */
void PowerOff();

/**
 * Enable wake lock notifications from the backend.
 *
 * This method is only used by WakeLockObserversManager.
 */
void EnableWakeLockNotifications();

/**
 * Disable wake lock notifications from the backend.
 *
 * This method is only used by WakeLockObserversManager.
 */
void DisableWakeLockNotifications();

/**
 * Inform the wake lock backend there is a new wake lock observer.
 * @param aWakeLockObserver The observer that should be added.
 */
void RegisterWakeLockObserver(WakeLockObserver* aObserver);

/**
 * Inform the wake lock backend a wake lock observer unregistered.
 * @param aWakeLockObserver The observer that should be removed.
 */
void UnregisterWakeLockObserver(WakeLockObserver* aObserver);

/**
 * Adjust the internal wake lock counts.
 * @param aTopic        lock topic
 * @param aLockAdjust   to increase or decrease active locks
 * @param aHiddenAdjust to increase or decrease hidden locks
 */
void ModifyWakeLock(const nsAString &aTopic,
                    hal::WakeLockControl aLockAdjust,
                    hal::WakeLockControl aHiddenAdjust);

/**
 * Query the wake lock numbers of aTopic.
 * @param aTopic        lock topic
 * @param aWakeLockInfo wake lock numbers
 */
void GetWakeLockInfo(const nsAString &aTopic, hal::WakeLockInformation *aWakeLockInfo);

/**
 * Notify of a change in the wake lock state.
 * @param aWakeLockInfo The new wake lock information.
 */
void NotifyWakeLockChange(const hal::WakeLockInformation& aWakeLockInfo);

/**
 * Inform the backend there is a new screen configuration observer.
 * @param aScreenConfigurationObserver The observer that should be added.
 */
void RegisterScreenConfigurationObserver(hal::ScreenConfigurationObserver* aScreenConfigurationObserver);

/**
 * Inform the backend a screen configuration observer unregistered.
 * @param aScreenConfigurationObserver The observer that should be removed.
 */
void UnregisterScreenConfigurationObserver(hal::ScreenConfigurationObserver* aScreenConfigurationObserver);

/**
 * Returns the current screen configuration.
 */
void GetCurrentScreenConfiguration(hal::ScreenConfiguration* aScreenConfiguration);

/**
 * Notify of a change in the screen configuration.
 * @param aScreenConfiguration The new screen orientation.
 */
void NotifyScreenConfigurationChange(const hal::ScreenConfiguration& aScreenConfiguration);

/**
 * Lock the screen orientation to the specific orientation.
 * @return Whether the lock has been accepted.
 */
bool LockScreenOrientation(const dom::ScreenOrientation& aOrientation);

/**
 * Unlock the screen orientation.
 */
void UnlockScreenOrientation();

/**
 * Register an observer for the switch of given SwitchDevice.
 *
 * The observer will receive data whenever the data generated by the
 * given switch.
 */
void RegisterSwitchObserver(hal::SwitchDevice aDevice, hal::SwitchObserver *aSwitchObserver);

/**
 * Unregister an observer for the switch of given SwitchDevice.
 */
void UnregisterSwitchObserver(hal::SwitchDevice aDevice, hal::SwitchObserver *aSwitchObserver);

/**
 * Notify the state of the switch. 
 *
 * This API is internal to hal; clients shouldn't call it directly.
 */
void NotifySwitchChange(const hal::SwitchEvent& aEvent);

/**
 * Get current switch information.
 */
hal::SwitchState GetCurrentSwitchState(hal::SwitchDevice aDevice);

/**
 * Register an observer that is notified when a programmed alarm
 * expires.
 *
 * Currently, there can only be 0 or 1 alarm observers.
 */
bool RegisterTheOneAlarmObserver(hal::AlarmObserver* aObserver);

/**
 * Unregister the alarm observer.  Doing so will implicitly cancel any
 * programmed alarm.
 */
void UnregisterTheOneAlarmObserver();

/**
 * Notify that the programmed alarm has expired.
 *
 * This API is internal to hal; clients shouldn't call it directly.
 */
void NotifyAlarmFired();

/**
 * Program the real-time clock to expire at the time |aSeconds|,
 * |aNanoseconds|.  These specify a point in real time relative to the
 * UNIX epoch.  The alarm will fire at this time point even if the
 * real-time clock is changed; that is, this alarm respects changes to
 * the real-time clock.  Return true iff the alarm was programmed.
 *
 * The alarm can be reprogrammed at any time.
 *
 * This API is currently only allowed to be used from non-sandboxed
 * contexts.
 */
bool SetAlarm(int32_t aSeconds, int32_t aNanoseconds);

/**
 * Set the priority of the given process.
 *
 * Exactly what this does will vary between platforms.  On *nix we might give
 * background processes higher nice values.  On other platforms, we might
 * ignore this call entirely.
 */
void SetProcessPriority(int aPid, hal::ProcessPriority aPriority);

/**
 * Register an observer for the FM radio.
 */
void RegisterFMRadioObserver(hal::FMRadioObserver* aRadioObserver);

/**
 * Unregister the observer for the FM radio.
 */
void UnregisterFMRadioObserver(hal::FMRadioObserver* aRadioObserver);

/**
 * Notify observers that a call to EnableFMRadio, DisableFMRadio, or FMRadioSeek
 * has completed, and indicate what the call returned.
 */
void NotifyFMRadioStatus(const hal::FMRadioOperationInformation& aRadioState);

/**
 * Enable the FM radio and configure it according to the settings in aInfo.
 */
void EnableFMRadio(const hal::FMRadioSettings& aInfo);

/**
 * Disable the FM radio.
 */
void DisableFMRadio();

/**
 * Seek to an available FM radio station.
 *
 */
void FMRadioSeek(const hal::FMRadioSeekDirection& aDirection);

/**
 * Get the current FM radio settings.
 */
void GetFMRadioSettings(hal::FMRadioSettings* aInfo);

/**
 * Set the FM radio's frequency.
 */
void SetFMRadioFrequency(const uint32_t frequency);

/**
 * Get the FM radio's frequency.
 */
uint32_t GetFMRadioFrequency();

/**
 * Get FM radio power state
 */
bool IsFMRadioOn();

/**
 * Get FM radio signal strength
 */
uint32_t GetFMRadioSignalStrength();

/**
 * Cancel FM radio seeking
 */
void CancelFMRadioSeek();

/**
 * Get FM radio band settings by country.
 */
hal::FMRadioSettings GetFMBandSettings(hal::FMRadioCountry aCountry);

/**
 * Start a watchdog to compulsively shutdown the system if it hangs.
 * @param aMode Specify how to shutdown the system.
 * @param aTimeoutSecs Specify the delayed seconds to shutdown the system.
 * 
 * This API is currently only allowed to be used from the main process.
 */
void StartForceQuitWatchdog(hal::ShutdownMode aMode, int32_t aTimeoutSecs);

} // namespace MOZ_HAL_NAMESPACE
} // namespace mozilla

#ifdef MOZ_DEFINED_HAL_NAMESPACE
# undef MOZ_DEFINED_HAL_NAMESPACE
# undef MOZ_HAL_NAMESPACE
#endif

#endif  // mozilla_Hal_h
