/* -*- Mode: js2; js2-basic-offset: 4; indent-tabs-mode: nil; -*- */
/* ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is about:memory
 *
 * The Initial Developer of the Original Code is the Mozilla Foundation.
 * Portions created by the Initial Developer are Copyright (C) 2009
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *   Vladimir Vukicevic <vladimir@pobox.com>
 *   Nicholas Nethercote <nnethercote@mozilla.com>
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either the GNU General Public License Version 2 or later (the "GPL"), or
 * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */

// This file is used for both about:memory and about:compartments.

"use strict";

//---------------------------------------------------------------------------
// Code shared by about:memory and about:compartments
//---------------------------------------------------------------------------

const Cc = Components.classes;
const Ci = Components.interfaces;
const Cu = Components.utils;

const KIND_NONHEAP           = Ci.nsIMemoryReporter.KIND_NONHEAP;
const KIND_HEAP              = Ci.nsIMemoryReporter.KIND_HEAP;
const KIND_OTHER             = Ci.nsIMemoryReporter.KIND_OTHER;
const KIND_SUMMARY           = Ci.nsIMemoryReporter.KIND_SUMMARY;
const UNITS_BYTES            = Ci.nsIMemoryReporter.UNITS_BYTES;
const UNITS_COUNT            = Ci.nsIMemoryReporter.UNITS_COUNT;
const UNITS_COUNT_CUMULATIVE = Ci.nsIMemoryReporter.UNITS_COUNT_CUMULATIVE;
const UNITS_PERCENTAGE       = Ci.nsIMemoryReporter.UNITS_PERCENTAGE;

// Because about:memory and about:compartments are non-standard URLs,
// location.search is undefined, so we have to use location.href here.
// The toLowerCase() calls ensure that addresses like "ABOUT:MEMORY" work.
let gVerbose;
{
  let split = document.location.href.split('?');
  document.title = split[0].toLowerCase();
  gVerbose = split.length == 2 && split[1].toLowerCase() == 'verbose';
}

let gChildMemoryListener = undefined;

// This is a useful function and an efficient way to implement it.
String.prototype.startsWith =
  function(s) { return this.lastIndexOf(s, 0) === 0; }

//---------------------------------------------------------------------------

// Forward slashes in URLs in paths are represented with backslashes to avoid
// being mistaken for path separators.  Paths/names where this hasn't been
// undone are prefixed with "unsafe"; the rest are prefixed with "safe".
function flipBackslashes(aUnsafeStr)
{
  return aUnsafeStr.replace(/\\/g, '/');
}

const gAssertionFailureMsgPrefix = "aboutMemory.js assertion failed: ";

function assert(aCond, aMsg)
{
  if (!aCond) {
    reportAssertionFailure(aMsg)
    throw(gAssertionFailureMsgPrefix + aMsg);
  }
}

function reportAssertionFailure(aMsg)
{
  let debug = Cc["@mozilla.org/xpcom/debug;1"].getService(Ci.nsIDebug2);
  if (debug.isDebugBuild) {
    debug.assertion(aMsg, "false", "aboutMemory.js", 0);
  }
}

function debug(x)
{
  appendElementWithText(document.body, "div", "debug", JSON.stringify(x));
}

//---------------------------------------------------------------------------

function addChildObserversAndUpdate(aUpdateFn)
{
  let os = Cc["@mozilla.org/observer-service;1"].
      getService(Ci.nsIObserverService);
  os.notifyObservers(null, "child-memory-reporter-request", null);

  gChildMemoryListener = aUpdateFn;
  os.addObserver(gChildMemoryListener, "child-memory-reporter-update", false);
 
  gChildMemoryListener();
}

function onLoad()
{
  if (document.title === "about:memory") {
    onLoadAboutMemory();
  } else if (document.title === "about:compartments") {
    onLoadAboutCompartments();
  } else {
    assert(false, "Unknown location: " + document.title);
  }
}

function onUnload()
{
  // We need to check if the observer has been added before removing; in some
  // circumstances (eg. reloading the page quickly) it might not have because
  // onLoadAbout{Memory,Compartments} might not fire.
  if (gChildMemoryListener) {
    let os = Cc["@mozilla.org/observer-service;1"].
        getService(Ci.nsIObserverService);
    os.removeObserver(gChildMemoryListener, "child-memory-reporter-update");
  }
}

// For maximum effect, this returns to the event loop between each
// notification.  See bug 610166 comment 12 for an explanation.
// Ideally a single notification would be enough.
function minimizeMemoryUsage3x(fAfter)
{
  let i = 0;

  function runSoon(f)
  {
    let tm = Cc["@mozilla.org/thread-manager;1"]
              .getService(Ci.nsIThreadManager);

    tm.mainThread.dispatch({ run: f }, Ci.nsIThread.DISPATCH_NORMAL);
  }

  function sendHeapMinNotificationsInner()
  {
    let os = Cc["@mozilla.org/observer-service;1"]
             .getService(Ci.nsIObserverService);
    os.notifyObservers(null, "memory-pressure", "heap-minimize");

    if (++i < 3) {
      runSoon(sendHeapMinNotificationsInner);
    } else {
      os.notifyObservers(null, "after-minimize-memory-usage", "about:memory");
      runSoon(fAfter);
    }
  }

  sendHeapMinNotificationsInner();
}

//---------------------------------------------------------------------------
 
/**
 * Iterates over each reporter and multi-reporter.
 *
 * @param aMgr
 *        The memory reporter manager.
 * @param aIgnoreSingle
 *        Function that indicates if we should skip a single reporter, based
 *        on its path.
 * @param aIgnoreMulti
 *        Function that indicates if we should skip a multi-reporter, based on
 *        its name.
 * @param aHandleReport
 *        The function that's called for each report.
 */
function processMemoryReporters(aMgr, aIgnoreSingle, aIgnoreMulti,
                                aHandleReport)
{
  // Process each memory reporter with aHandleReport.
  //
  // - Note that copying rOrig.amount (which calls a C++ function under the
  //   IDL covers) to r._amount for every reporter now means that the
  //   results as consistent as possible -- measurements are made all at
  //   once before most of the memory required to generate this page is
  //   allocated.
  //
  // - After this point we never use the original memory report again.

  function handleReport(aProcess, aUnsafePath, aKind, aUnits, aAmount,
                        aDescription)
  {
    checkReport(aUnsafePath, aKind, aUnits, aAmount, aDescription);
    aHandleReport(aProcess, aUnsafePath, aKind, aUnits, aAmount, aDescription);
  }

  let e = aMgr.enumerateReporters();
  while (e.hasMoreElements()) {
    let rOrig = e.getNext().QueryInterface(Ci.nsIMemoryReporter);
    let unsafePath;
    try {
      unsafePath = rOrig.path;
      if (!aIgnoreSingle(unsafePath)) {
        handleReport(rOrig.process, unsafePath, rOrig.kind, rOrig.units, 
                     rOrig.amount, rOrig.description);
      }
    }
    catch (ex) {
      debug("Exception thrown by memory reporter: " + unsafePath + ": " + ex);
    }
  }

  let e = aMgr.enumerateMultiReporters();
  while (e.hasMoreElements()) {
    let mrOrig = e.getNext().QueryInterface(Ci.nsIMemoryMultiReporter);
    let name = mrOrig.name;
    try {
      if (!aIgnoreMulti(name)) {
        mrOrig.collectReports(handleReport, null);
      }
    }
    catch (ex) {
      // There are two exception cases that must be distinguished here.
      //
      // - We want to halt proceedings on exceptions thrown within this file
      //   (i.e. assertion failures in handleReport);  such exceptions contain
      //   gAssertionFailureMsgPrefix in their string representation.
      //
      // - We want to continue on when faced with exceptions thrown outside
      //   this file (i.e. when measuring an amount in collectReports).
      let str = ex.toString();
      if (str.search(gAssertionFailureMsgPrefix) >= 0) {
        throw(ex); 
      } else {
        debug("Exception thrown within memory multi-reporter: " + name + ": " +
              ex);
      }
    }
  }
}

// This regexp matches sentences and sentence fragments, i.e. strings that
// start with a capital letter and ends with a '.'.  (The final sentence may be
// in parentheses, so a ')' might appear after the '.'.)
const gSentenceRegExp = /^[A-Z].*\.\)?$/m;

function checkReport(aUnsafePath, aKind, aUnits, aAmount, aDescription)
{
  if (aUnsafePath.startsWith("explicit/")) {
    assert(aKind === KIND_HEAP || aKind === KIND_NONHEAP, "bad explicit kind");
    assert(aUnits === UNITS_BYTES, "bad explicit units");
    assert(aDescription.match(gSentenceRegExp),
           "non-sentence explicit description");

  } else if (aUnsafePath.startsWith("smaps/")) {
    assert(aKind === KIND_NONHEAP, "bad smaps kind");
    assert(aUnits === UNITS_BYTES, "bad smaps units");
    assert(aDescription !== "", "empty smaps description");

  } else if (aKind === KIND_SUMMARY) {
    assert(!aUnsafePath.startsWith("explicit/") &&
           !aUnsafePath.startsWith("smaps/"),
           "bad SUMMARY path");

  } else {
    assert(aUnsafePath.indexOf("/") === -1, "'other' path contains '/'");
    assert(aKind === KIND_OTHER, "bad other kind: " + aUnsafePath);
    assert(aDescription.match(gSentenceRegExp),
           "non-sentence other description " + aDescription);
  }
}

//---------------------------------------------------------------------------

function clearBody()
{
  let oldBody = document.body;
  let body = oldBody.cloneNode(false);
  oldBody.parentNode.replaceChild(body, oldBody);
  body.classList.add(gVerbose ? 'verbose' : 'non-verbose');
  return body;
}

function appendTextNode(aP, aText)
{
  let e = document.createTextNode(aText);
  aP.appendChild(e);
  return e;
}

function appendElement(aP, aTagName, aClassName)
{
  let e = document.createElement(aTagName);
  if (aClassName) {
    e.className = aClassName;
  }
  aP.appendChild(e);
  return e;
}

function appendElementWithText(aP, aTagName, aClassName, aText)
{
  let e = appendElement(aP, aTagName, aClassName);
  appendTextNode(e, aText);
  return e;
}

//---------------------------------------------------------------------------
// Code specific to about:memory
//---------------------------------------------------------------------------

const kTreeDescriptions = {
  'explicit' :
"This tree covers explicit memory allocations by the application, both at the \
operating system level (via calls to functions such as VirtualAlloc, \
vm_allocate, and mmap), and at the heap allocation level (via functions such \
as malloc, calloc, realloc, memalign, operator new, and operator new[]).\
\n\n\
It excludes memory that is mapped implicitly such as code and data segments, \
and thread stacks.  It also excludes heap memory that has been freed by the \
application but is still being held onto by the heap allocator. \
\n\n\
It is not guaranteed to cover every explicit allocation, but it does cover \
most (including the entire heap), and therefore it is the single best number \
to focus on when trying to reduce memory usage.",

  'resident':
"This tree shows how much space in physical memory each of the process's \
mappings is currently using (the mapping's 'resident set size', or 'RSS'). \
This is a good measure of the 'cost' of the mapping, although it does not \
take into account the fact that shared libraries may be mapped by multiple \
processes but appear only once in physical memory. \
\n\n\
Note that the 'resident' value here might not equal the value for 'resident' \
under 'Other Measurements' because the two measurements are not taken at \
exactly the same time.",

  'pss':
"This tree shows how much space in physical memory can be 'blamed' on this \
process.  For each mapping, its 'proportional set size' (PSS) is the \
mapping's resident size divided by the number of processes which use the \
mapping.  So if a mapping is private to this process, its PSS should equal \
its RSS.  But if a mapping is shared between three processes, its PSS in each \
of the processes would be 1/3 its RSS.",

  'vsize':
"This tree shows how much virtual addres space each of the process's mappings \
takes up (the mapping's 'vsize').  A mapping may have a large vsize but use \
only a small amount of physical memory; the resident set size of a mapping is \
a better measure of the mapping's 'cost'. \
\n\n\
Note that the 'vsize' value here might not equal the value for 'vsize' under \
'Other Measurements' because the two measurements are not taken at exactly \
the same time.",

  'swap':
"This tree shows how much space in the swap file each of the process's \
mappings is currently using. Mappings which are not in the swap file (i.e., \
nodes which would have a value of 0 in this tree) are omitted."
};

const kTreeNames = {
  'explicit': 'Explicit Allocations',
  'resident': 'Resident Set Size (RSS) Breakdown',
  'pss':      'Proportional Set Size (PSS) Breakdown',
  'vsize':    'Virtual Size Breakdown',
  'swap':     'Swap Usage Breakdown',
  'other':    'Other Measurements'
};

const kMapTreePaths =
  ['smaps/resident', 'smaps/pss', 'smaps/vsize', 'smaps/swap'];

//---------------------------------------------------------------------------

function onLoadAboutMemory()
{
  addChildObserversAndUpdate(updateAboutMemory);
}

function doGlobalGC()
{
  Cu.forceGC();
  let os = Cc["@mozilla.org/observer-service;1"]
            .getService(Ci.nsIObserverService);
  os.notifyObservers(null, "child-gc-request", null);
  updateAboutMemory();
}

function doCC()
{
  window.QueryInterface(Ci.nsIInterfaceRequestor)
        .getInterface(Ci.nsIDOMWindowUtils)
        .cycleCollect();
  let os = Cc["@mozilla.org/observer-service;1"]
            .getService(Ci.nsIObserverService);
  os.notifyObservers(null, "child-cc-request", null);
  updateAboutMemory();
}

//---------------------------------------------------------------------------

/**
 * Top-level function that does the work of generating the page.
 */
function updateAboutMemory()
{
  // First, clear the page contents.  Necessary because updateAboutMemory()
  // might be called more than once due to the "child-memory-reporter-update"
  // observer.
  let body = clearBody();

  let mgr = Cc["@mozilla.org/memory-reporter-manager;1"].
      getService(Ci.nsIMemoryReporterManager);

  // Generate output for one process at a time.  Always start with the
  // Main process.
  let reportsByProcess = getReportsByProcess(mgr);
  let hasMozMallocUsableSize = mgr.hasMozMallocUsableSize;
  appendProcessReportsElements(body, "Main", reportsByProcess["Main"],
                               hasMozMallocUsableSize);
  for (let process in reportsByProcess) {
    if (process !== "Main") {
      appendProcessReportsElements(body, process, reportsByProcess[process],
                                   hasMozMallocUsableSize);
    }
  }

  appendElement(body, "hr");

  // Memory-related actions.
  const UpDesc = "Re-measure.";
  const GCDesc = "Do a global garbage collection.";
  const CCDesc = "Do a cycle collection.";
  const MPDesc = "Send three \"heap-minimize\" notifications in a " +
                 "row.  Each notification triggers a global garbage " +
                 "collection followed by a cycle collection, and causes the " +
                 "process to reduce memory usage in other ways, e.g. by " +
                 "flushing various caches.";

  function appendButton(aTitle, aOnClick, aText, aId)
  {
    let b = appendElementWithText(body, "button", "", aText);
    b.title = aTitle;
    b.onclick = aOnClick
    if (aId) {
      b.id = aId;
    }
  }

  // The "Update" button has an id so it can be clicked in a test.
  appendButton(UpDesc, updateAboutMemory, "Update", "updateButton");
  appendButton(GCDesc, doGlobalGC,        "GC");
  appendButton(CCDesc, doCC,              "CC");
  appendButton(MPDesc, function() { minimizeMemoryUsage3x(updateAboutMemory); },
                                          "Minimize memory usage");

  let div1 = appendElement(body, "div");
  if (gVerbose) {
    let a = appendElementWithText(div1, "a", "option", "Less verbose");
    a.href = "about:memory";
  } else {
    let a = appendElementWithText(div1, "a", "option", "More verbose");
    a.href = "about:memory?verbose";
  }

  let div2 = appendElement(body, "div");
  let a = appendElementWithText(div2, "a", "option",
                                "Troubleshooting information");
  a.href = "about:support";

  let legendText1 = "Click on a non-leaf node in a tree to expand ('++') " +
                    "or collapse ('--') its children.";
  let legendText2 = "Hover the pointer over the name of a memory report " +
                    "to see a description of what it measures.";

  appendElementWithText(body, "div", "legend", legendText1);
  appendElementWithText(body, "div", "legend", legendText2);
}

//---------------------------------------------------------------------------

function Report(aUnsafePath, aKind, aUnits, aAmount, aDescription)
{
  this._unsafePath  = aUnsafePath;
  this._kind        = aKind;
  this._units       = aUnits;
  this._amount      = aAmount;
  this._description = aDescription;
  // this._nMerged is only defined if > 1
  // this._done is defined and set to true when the Report's amount is read
}

Report.prototype = {
  // Sum the values and mark |this| as a dup.  We mark dups because it's useful
  // to know when a report is duplicated;  it might be worth investigating and
  // splitting up to have non-duplicated names.
  merge: function(r) {
    this._amount += r._amount;
    this._nMerged = this._nMerged ? this._nMerged + 1 : 2;
  },

  treeNameMatches: function(aTreeName) {
    // Nb: the '/' must be present, because we have a KIND_OTHER reporter
    // called "explicit" which is not part of the "explicit" tree.
    return this._unsafePath.startsWith(aTreeName) &&
           this._unsafePath.charAt(aTreeName.length) === '/';
  }
};

function getReportsByProcess(aMgr)
{
  // Ignore the "smaps" multi-reporter in non-verbose mode, and the
  // "compartments" and "ghost-windows" multi-reporters all the time.  (Note
  // that reports from these multi-reporters can reach here as single reports
  // if they were in the child process.)

  function ignoreSingle(aPath) 
  {
    return (aPath.startsWith("smaps/") && !gVerbose) ||
           aPath.startsWith("compartments/") ||
           aPath.startsWith("ghost-windows/");
  }

  function ignoreMulti(aName)
  {
    return (aName === "smaps" && !gVerbose) ||
           aName === "compartments" ||
           aName === "ghost-windows";
  }

  let reportsByProcess = {};

  function handleReport(aProcess, aUnsafePath, aKind, aUnits, aAmount,
                        aDescription)
  {
    let process = aProcess === "" ? "Main" : aProcess;
    let r = new Report(aUnsafePath, aKind, aUnits, aAmount, aDescription);
    if (!reportsByProcess[process]) {
      reportsByProcess[process] = {};
    }
    let reports = reportsByProcess[process];
    let rOld = reports[r._unsafePath];
    if (rOld) {
      // Already an entry;  must be a duplicated report.  This can happen
      // legitimately.  Merge them.
      rOld.merge(r);
    } else {
      reports[r._unsafePath] = r;
    }
  }

  processMemoryReporters(aMgr, ignoreSingle, ignoreMulti, handleReport);

  return reportsByProcess;
}

//---------------------------------------------------------------------------

// There are two kinds of TreeNode.
// - Leaf TreeNodes correspond to Reports and have more properties.
// - Non-leaf TreeNodes are just scaffolding nodes for the tree;  their values
//   are derived from their children.
function TreeNode(aUnsafeName)
{
  // Nb: _units is not needed, it's always UNITS_BYTES.
  this._unsafeName = aUnsafeName;
  this._kids = [];
  // Leaf TreeNodes have these properties added immediately after construction:
  // - _amount
  // - _description
  // - _kind
  // - _nMerged (only defined if > 1)
  //
  // Non-leaf TreeNodes have these properties added later:
  // - _amount
  // - _description
  // - _hideKids (only defined if true)
}

TreeNode.prototype = {
  findKid: function(aUnsafeName) {
    for (let i = 0; i < this._kids.length; i++) {
      if (this._kids[i]._unsafeName === aUnsafeName) {
        return this._kids[i];
      }
    }
    return undefined;
  },

  toString: function() {
    return formatBytes(this._amount);
  }
};

TreeNode.compare = function(a, b) {
  return b._amount - a._amount;
};

/**
 * From a table of Reports, builds a tree that mirrors the tree structure that
 * will be shown as output.
 *
 * @param aReports
 *        The table of Reports, indexed by _unsafePath.
 * @param aTreeName
 *        The name of the tree being built.
 * @return The built tree.
 */
function buildTree(aReports, aTreeName)
{
  // We want to process all reports that begin with |aTreeName|.  First we
  // build the tree but only fill the properties that we can with a top-down
  // traversal.

  // There should always be at least one matching Report object when
  // |aTreeName| is "explicit".  But there may be zero for "smaps" trees;  if
  // that happens, bail.
  let foundReport = false;
  for (let unsafePath in aReports) {
    if (aReports[unsafePath].treeNameMatches(aTreeName)) {
      foundReport = true;
      break;
    }
  }
  if (!foundReport) {
    assert(aTreeName !== 'explicit', "aTreeName !== 'explicit'");
    return null;
  }

  let t = new TreeNode("falseRoot");
  for (let unsafePath in aReports) {
    // Add any missing nodes in the tree implied by the unsafePath.
    let r = aReports[unsafePath];
    if (r.treeNameMatches(aTreeName)) {
      let unsafeNames = r._unsafePath.split('/');
      let u = t;
      for (let i = 0; i < unsafeNames.length; i++) {
        let unsafeName = unsafeNames[i];
        let uMatch = u.findKid(unsafeName);
        if (uMatch) {
          u = uMatch;
        } else {
          let v = new TreeNode(unsafeName);
          u._kids.push(v);
          u = v;
        }
      }
      // Fill in extra details in the leaf node from the Report object.
      u._amount = r._amount;
      u._description = r._description;
      u._kind = r._kind;
      if (r._nMerged) {
        u._nMerged = r._nMerged;
      }
      r._done = true;
    }
  }

  // Using falseRoot makes the above code simpler.  Now discard it, leaving
  // aTreeName at the root.
  t = t._kids[0];

  // Next, fill in the remaining properties bottom-up.
  function fillInNonLeafNodes(aT)
  {
    if (aT._kids.length === 0) {
      // Leaf node.  Has already been filled in.
      assert(aT._kind !== undefined, "aT._kind is undefined for leaf node");
    } else {
      // Non-leaf node.  Derive its _amount and _description entirely
      // from its children.
      assert(aT._kind === undefined, "aT._kind is defined for non-leaf node");
      let childrenBytes = 0;
      for (let i = 0; i < aT._kids.length; i++) {
        childrenBytes += fillInNonLeafNodes(aT._kids[i]);
      }
      aT._amount = childrenBytes;
      aT._description = "The sum of all entries below '" +
                        flipBackslashes(aT._unsafeName) + "'.";
    }
    return aT._amount;
  }

  fillInNonLeafNodes(t);

  // Reduce the depth of the tree by the number of occurrences of '/' in
  // aTreeName.  (Thus the tree named 'foo/bar/baz' will be rooted at 'baz'.)
  let slashCount = 0;
  for (let i = 0; i < aTreeName.length; i++) {
    if (aTreeName[i] == '/') {
      assert(t._kids.length == 1, "Not expecting multiple kids here.");
      t = t._kids[0];
    }
  }

  // Set the (unsafe) description on the root node.
  t._description = kTreeDescriptions[t._unsafeName];

  return t;
}

/**
 * Ignore all the memory reports that belong to a "smaps" tree;  this involves
 * explicitly marking them as done.
 *
 * @param aReports
 *        The table of Reports, indexed by _unsafePath.
 */
function ignoreSmapsTrees(aReports)
{
  for (let unsafePath in aReports) {
    let r = aReports[unsafePath];
    if (r.treeNameMatches("smaps")) {
      r._done = true;
    }
  }
}

/**
 * Do some work which only makes sense for the 'explicit' tree.
 *
 * @param aT
 *        The tree.
 * @param aReports
 *        Table of Reports for this process, indexed by _unsafePath.
 * @return A boolean indicating if "heap-allocated" is known for the process.
 */
function fixUpExplicitTree(aT, aReports)
{
  // Determine how many bytes are in heap reports.
  function getKnownHeapUsedBytes(aT)
  {
    let n = 0;
    if (aT._kids.length === 0) {
      // Leaf node.
      assert(aT._kind !== undefined, "aT._kind is undefined for leaf node");
      n = aT._kind === KIND_HEAP ? aT._amount : 0;
    } else {
      for (let i = 0; i < aT._kids.length; i++) {
        n += getKnownHeapUsedBytes(aT._kids[i]);
      }
    }
    return n;
  }

  // A special case:  compute the derived "heap-unclassified" value.  Don't
  // mark "heap-allocated" when we get its size because we want it to appear
  // in the "Other Measurements" list.
  let heapAllocatedReport = aReports["heap-allocated"];
  if (heapAllocatedReport === undefined)
    return false;

  let heapAllocatedBytes = heapAllocatedReport._amount;
  let heapUnclassifiedT = new TreeNode("heap-unclassified");
  heapUnclassifiedT._amount = heapAllocatedBytes - getKnownHeapUsedBytes(aT);
  // This kindToString() ensures the "(Heap)" prefix is set without having to
  // set the _kind property, which would mean that there is a corresponding
  // Report object for this TreeNode object (which isn't true)
  heapUnclassifiedT._description = kindToString(KIND_HEAP) +
      "Memory not classified by a more specific reporter. This includes " +
      "slop bytes due to internal fragmentation in the heap allocator " +
      "(caused when the allocator rounds up request sizes).";
  aT._kids.push(heapUnclassifiedT);
  aT._amount += heapUnclassifiedT._amount;
  return true;
}

/**
 * Sort all kid nodes from largest to smallest, and insert aggregate nodes
 * where appropriate.
 *
 * @param aTotalBytes
 *        The size of the tree's root node.
 * @param aT
 *        The tree.
 */
function sortTreeAndInsertAggregateNodes(aTotalBytes, aT)
{
  const kSignificanceThresholdPerc = 1;

  function isInsignificant(aT)
  {
    return !gVerbose &&
           (100 * aT._amount / aTotalBytes) < kSignificanceThresholdPerc;
  }

  if (aT._kids.length === 0) {
    return;
  }

  aT._kids.sort(TreeNode.compare);

  // If the first child is insignificant, they all are, and there's no point
  // creating an aggregate node that lacks siblings.  Just set the parent's
  // _hideKids property and process all children.
  if (isInsignificant(aT._kids[0])) {
    aT._hideKids = true;
    for (let i = 0; i < aT._kids.length; i++) {
      sortTreeAndInsertAggregateNodes(aTotalBytes, aT._kids[i]);
    }
    return;
  }

  // Look at all children except the last one.
  let i;
  for (i = 0; i < aT._kids.length - 1; i++) {
    if (isInsignificant(aT._kids[i])) {
      // This child is below the significance threshold.  If there are other
      // (smaller) children remaining, move them under an aggregate node.
      let i0 = i;
      let nAgg = aT._kids.length - i0;
      // Create an aggregate node.
      let aggT = new TreeNode("(" + nAgg + " tiny)");
      let aggBytes = 0;
      for ( ; i < aT._kids.length; i++) {
        aggBytes += aT._kids[i]._amount;
        aggT._kids.push(aT._kids[i]);
      }
      aggT._hideKids = true;
      aggT._amount = aggBytes;
      aggT._description =
        nAgg + " sub-trees that are below the " + kSignificanceThresholdPerc +
        "% significance threshold.";
      aT._kids.splice(i0, nAgg, aggT);
      aT._kids.sort(TreeNode.compare);

      // Process the moved children.
      for (i = 0; i < aggT._kids.length; i++) {
        sortTreeAndInsertAggregateNodes(aTotalBytes, aggT._kids[i]);
      }
      return;
    }

    sortTreeAndInsertAggregateNodes(aTotalBytes, aT._kids[i]);
  }

  // The first n-1 children were significant.  Don't consider if the last child
  // is significant;  there's no point creating an aggregate node that only has
  // one child.  Just process it.
  sortTreeAndInsertAggregateNodes(aTotalBytes, aT._kids[i]);
}

// Global variable indicating if we've seen any invalid values for this
// process;  it holds the unsafePaths of any such reports.  It is reset for
// each new process.
let gUnsafePathsWithInvalidValuesForThisProcess = [];

function appendWarningElements(aP, aHasKnownHeapAllocated,
                               aHasMozMallocUsableSize)
{
  if (!aHasKnownHeapAllocated && !aHasMozMallocUsableSize) {
    appendElementWithText(aP, "p", "", 
      "WARNING: the 'heap-allocated' memory reporter and the " +
      "moz_malloc_usable_size() function do not work for this platform " +
      "and/or configuration.  This means that 'heap-unclassified' is not " +
      "shown and the 'explicit' tree shows much less memory than it should.");
    appendTextNode(aP, "\n\n");

  } else if (!aHasKnownHeapAllocated) {
    appendElementWithText(aP, "p", "", 
      "WARNING: the 'heap-allocated' memory reporter does not work for this " +
      "platform and/or configuration. This means that 'heap-unclassified' " +
      "is not shown and the 'explicit' tree shows less memory than it should.");
    appendTextNode(aP, "\n\n");

  } else if (!aHasMozMallocUsableSize) {
    appendElementWithText(aP, "p", "", 
      "WARNING: the moz_malloc_usable_size() function does not work for " +
      "this platform and/or configuration.  This means that much of the " +
      "heap-allocated memory is not measured by individual memory reporters " +
      "and so will fall under 'heap-unclassified'.");
    appendTextNode(aP, "\n\n");
  }

  if (gUnsafePathsWithInvalidValuesForThisProcess.length > 0) {
    let div = appendElement(aP, "div");
    appendElementWithText(div, "p", "", 
      "WARNING: the following values are negative or unreasonably large.");
    appendTextNode(div, "\n");  

    let ul = appendElement(div, "ul");
    for (let i = 0;
         i < gUnsafePathsWithInvalidValuesForThisProcess.length;
         i++)
    {
      appendTextNode(ul, " ");
      appendElementWithText(ul, "li", "", 
        flipBackslashes(gUnsafePathsWithInvalidValuesForThisProcess[i]));
      appendTextNode(ul, "\n");
    }

    appendElementWithText(div, "p", "",
      "This indicates a defect in one or more memory reporters.  The " +
      "invalid values are highlighted.");
    appendTextNode(div, "\n\n");  
    gUnsafePathsWithInvalidValuesForThisProcess = [];  // reset for the next process
  }
}

/**
 * Appends the elements for a single process's Reports.
 *
 * @param aP
 *        The parent DOM node.
 * @param aProcess
 *        The name of the process.
 * @param aReports
 *        Table of Reports for this process, indexed by _unsafePath.
 * @param aHasMozMallocUsableSize
 *        Boolean indicating if moz_malloc_usable_size works.
 * @return The generated text.
 */
function appendProcessReportsElements(aP, aProcess, aReports,
                                      aHasMozMallocUsableSize)
{
  appendElementWithText(aP, "h1", "", aProcess + " Process");
  appendTextNode(aP, "\n\n");   // gives nice spacing when we cut and paste

  // We'll fill this in later.
  let warningsDiv = appendElement(aP, "div", "accuracyWarning");

  let explicitTree = buildTree(aReports, 'explicit');
  let hasKnownHeapAllocated = fixUpExplicitTree(explicitTree, aReports);
  sortTreeAndInsertAggregateNodes(explicitTree._amount, explicitTree);
  appendTreeElements(aP, explicitTree, aProcess);

  // We only show these breakdown trees in verbose mode.
  if (gVerbose) {
    kMapTreePaths.forEach(function(t) {
      let tree = buildTree(aReports, t);

      // |tree| will be null if we don't have any reports for the given
      // unsafePath.
      if (tree) {
        sortTreeAndInsertAggregateNodes(tree._amount, tree);
        tree._hideKids = true;   // smaps trees are always initially collapsed
        appendTreeElements(aP, tree, aProcess);
      }
    });
  } else {
    // Although we skip the "smaps" multi-reporter in getReportsByProcess(),
    // we might get some smaps reports from a child process, and they must be
    // explicitly ignored.
    ignoreSmapsTrees(aReports);
  }

  // We have to call appendOtherElements after we process all the trees,
  // because it looks at all the reports which aren't part of a tree.
  appendOtherElements(aP, aReports);

  // Add any warnings about inaccuracies due to platform limitations.
  // These must be computed after generating all the text.  The newlines give
  // nice spacing if we cut+paste into a text buffer.
  appendWarningElements(warningsDiv, hasKnownHeapAllocated,
                        aHasMozMallocUsableSize);
}

/**
 * Determines if a number has a negative sign when converted to a string.
 * Works even for -0.
 *
 * @param aN
 *        The number.
 * @return A boolean.
 */
function hasNegativeSign(aN)
{
  if (aN === 0) {                   // this succeeds for 0 and -0
    return 1 / aN === -Infinity;    // this succeeds for -0
  }
  return aN < 0;
}

/**
 * Formats an int as a human-readable string.
 *
 * @param aN
 *        The integer to format.
 * @param aExtra
 *        An extra string to tack onto the end.
 * @return A human-readable string representing the int.
 *
 * Note: building an array of chars and converting that to a string with
 * Array.join at the end is more memory efficient than using string
 * concatenation.  See bug 722972 for details.
 */
function formatInt(aN, aExtra)
{
  let neg = false;
  if (hasNegativeSign(aN)) {
    neg = true;
    aN = -aN;
  }
  let s = [];
  while (true) {
    let k = aN % 1000;
    aN = Math.floor(aN / 1000);
    if (aN > 0) {
      if (k < 10) {
        s.unshift(",00", k);
      } else if (k < 100) {
        s.unshift(",0", k);
      } else {
        s.unshift(",", k);
      }
    } else {
      s.unshift(k);
      break;
    }
  }
  if (neg) {
    s.unshift("-");
  }
  if (aExtra) {
    s.push(aExtra);
  }
  return s.join("");
}

/**
 * Converts a byte count to an appropriate string representation.
 *
 * @param aBytes
 *        The byte count.
 * @return The string representation.
 */
function formatBytes(aBytes)
{
  let unit = gVerbose ? " B" : " MB";

  let s;
  if (gVerbose) {
    s = formatInt(aBytes, unit);
  } else {
    let mbytes = (aBytes / (1024 * 1024)).toFixed(2);
    let a = String(mbytes).split(".");
    // If the argument to formatInt() is -0, it will print the negative sign.
    s = formatInt(Number(a[0])) + "." + a[1] + unit;
  }
  return s;
}

/**
 * Converts a percentage to an appropriate string representation.
 *
 * @param aPerc100x
 *        The percentage, multiplied by 100 (see nsIMemoryReporter).
 * @return The string representation
 */
function formatPercentage(aPerc100x)
{
  return (aPerc100x / 100).toFixed(2) + "%";
}

/**
 * Right-justifies a string in a field of a given width, padding as necessary.
 *
 * @param aS
 *        The string.
 * @param aN
 *        The field width.
 * @param aC
 *        The char used to pad.
 * @return The string representation.
 */
function pad(aS, aN, aC)
{
  let padding = "";
  let n2 = aN - aS.length;
  for (let i = 0; i < n2; i++) {
    padding += aC;
  }
  return padding + aS;
}

// There's a subset of the Unicode "light" box-drawing chars that are widely
// implemented in terminals, and this code sticks to that subset to maximize
// the chance that cutting and pasting about:memory output to a terminal will
// work correctly:
const kHorizontal       = "\u2500",
      kVertical         = "\u2502",
      kUpAndRight       = "\u2514",
      kVerticalAndRight = "\u251c",
      kDoubleHorizontalSep = " \u2500\u2500 ";

function appendMrValueSpan(aP, aValue, aIsInvalid)
{
  appendElementWithText(aP, "span", "mrValue" + (aIsInvalid ? " invalid" : ""),
                        aValue);
}

function kindToString(aKind)
{
  switch (aKind) {
   case KIND_NONHEAP: return "(Non-heap) ";
   case KIND_HEAP:    return "(Heap) ";
   case KIND_OTHER:
   case undefined:    return "";
   default:           assert(false, "bad kind in kindToString");
  }
}

// Possible states for kids.
const kNoKids   = 0;
const kHideKids = 1;
const kShowKids = 2;

function appendMrNameSpan(aP, aKind, aKidsState, aDescription, aUnsafeName,
                          aIsInvalid, aNMerged)
{
  let text = "";
  if (aKidsState === kNoKids) {
    appendElementWithText(aP, "span", "mrSep", kDoubleHorizontalSep);
  } else if (aKidsState === kHideKids) {
    appendElementWithText(aP, "span", "mrSep",        " ++ ");
    appendElementWithText(aP, "span", "mrSep hidden", " -- ");
  } else if (aKidsState === kShowKids) {
    appendElementWithText(aP, "span", "mrSep hidden", " ++ ");
    appendElementWithText(aP, "span", "mrSep",        " -- ");
  } else {
    assert(false, "bad aKidsState");
  }

  let nameSpan = appendElementWithText(aP, "span", "mrName",
                                       flipBackslashes(aUnsafeName));
  nameSpan.title = kindToString(aKind) + aDescription;

  if (aIsInvalid) {
    let noteSpan = appendElementWithText(aP, "span", "mrNote", " [?!]");
    noteSpan.title =
      "Warning: this value is invalid and indicates a bug in one or more " +
      "memory reporters. ";
  }
  if (aNMerged) {
    let noteSpan = appendElementWithText(aP, "span", "mrNote",
                                         " [" + aNMerged + "]");
    noteSpan.title =
      "This value is the sum of " + aNMerged +
      " memory reporters that all have the same path.";
  }
}

// This is used to record the (safe) IDs of which sub-trees have been manually
// expanded (marked as true) and collapsed (marked as false).  It's used to
// replicate the collapsed/expanded state when the page is updated.  It can end
// up holding IDs of nodes that no longer exist, e.g. for compartments that
// have been closed.  This doesn't seem like a big deal, because the number is
// limited by the number of entries the user has changed from their original
// state.
let gShowSubtreesBySafeTreeId = {};

function assertClassListContains(e, className) {
  assert(e, "undefined " + className);
  assert(e.classList.contains(className), "classname isn't " + className);
}

function toggle(aEvent)
{
  // This relies on each line being a span that contains at least five spans:
  // mrValue, mrPerc, mrSep ('++'), mrSep ('--'), mrName, and then zero or more
  // mrNotes.  All whitespace must be within one of these spans for this
  // function to find the right nodes.  And the span containing the children of
  // this line must immediately follow.  Assertions check this.

  // |aEvent.target| will be one of the five spans.  Get the outer span.
  let outerSpan = aEvent.target.parentNode;
  assertClassListContains(outerSpan, "hasKids");

  // Toggle visibility of the '++' and '--' separators.
  let plusSpan  = outerSpan.childNodes[2];
  let minusSpan = outerSpan.childNodes[3];
  assertClassListContains(plusSpan,  "mrSep");
  assertClassListContains(minusSpan, "mrSep");
  let isExpansion = !plusSpan.classList.contains("hidden");
  plusSpan .classList.toggle("hidden");
  minusSpan.classList.toggle("hidden");

  // Toggle visibility of the span containing this node's children.
  let subTreeSpan = outerSpan.nextSibling;
  assertClassListContains(subTreeSpan, "kids");
  subTreeSpan.classList.toggle("hidden");

  // Record/unrecord that this sub-tree was toggled.
  let safeTreeId = outerSpan.id;
  if (gShowSubtreesBySafeTreeId[safeTreeId] !== undefined) {
    delete gShowSubtreesBySafeTreeId[safeTreeId];
  } else {
    gShowSubtreesBySafeTreeId[safeTreeId] = isExpansion;
  }
}

function expandPathToThisElement(aElement)
{
  if (aElement.classList.contains("kids")) {
    // Unhide the kids.
    aElement.classList.remove("hidden");
    expandPathToThisElement(aElement.previousSibling);  // hasKids

  } else if (aElement.classList.contains("hasKids")) {
    // Unhide the '--' separator and hide the '++' separator.
    let  plusSpan = aElement.childNodes[2];
    let minusSpan = aElement.childNodes[3];
    assertClassListContains(plusSpan,  "mrSep");
    assertClassListContains(minusSpan, "mrSep");
    plusSpan.classList.add("hidden");
    minusSpan.classList.remove("hidden");
    expandPathToThisElement(aElement.parentNode);       // kids or pre.entries

  } else {
    assertClassListContains(aElement, "entries");
  }
}

/**
 * Appends the elements for the tree, including its heading.
 *
 * @param aPOuter
 *        The parent DOM node.
 * @param aT
 *        The tree.
 * @param aProcess
 *        The process the tree corresponds to.
 * @return The generated text.
 */
function appendTreeElements(aPOuter, aT, aProcess)
{
  let treeBytes = aT._amount;
  let rootStringLength = aT.toString().length;
  let isExplicitTree = aT._unsafeName == 'explicit';

  /**
   * Appends the elements for a particular tree, without a heading.
   *
   * @param aP
   *        The parent DOM node.
   * @param aUnsafePrePath
   *        The partial unsafePath leading up to this node.
   * @param aT
   *        The tree.
   * @param aBaseIndentText
   *        The base text of the indent, which may be augmented within the
   *        functton.
   * @param aIndentGuide
   *        Records what indentation is required for this tree.  It has one
   *        entry per level of indentation.  For each entry, ._isLastKid
   *        records whether the node in question is the last child, and
   *        ._depth records how many chars of indentation are required.
   * @param aParentStringLength
   *        The length of the formatted byte count of the top node in the tree.
   * @return The generated text.
   */
  function appendTreeElements2(aP, aUnsafePrePath, aT, aIndentGuide,
                               aBaseIndentText, aParentStringLength)
  {
    function repeatStr(aA, aC, aN)
    {
      for (let i = 0; i < aN; i++) {
        aA.push(aC);
      }
    }

    let unsafePath = aUnsafePrePath + aT._unsafeName;

    // Indent more if this entry is narrower than its parent, and update
    // aIndentGuide accordingly.
    let tString = aT.toString();
    let extraIndentArray = [];
    let extraIndentLength = Math.max(aParentStringLength - tString.length, 0);
    if (extraIndentLength > 0) {
      repeatStr(extraIndentArray, kHorizontal, extraIndentLength);
      aIndentGuide[aIndentGuide.length - 1]._depth += extraIndentLength;
    }
    let indentText = aBaseIndentText + extraIndentArray.join("");
    appendElementWithText(aP, "span", "treeLine", indentText);

    // Generate the percentage;  detect and record invalid values at the same
    // time.
    let percText = "";
    let tIsInvalid = false;
    if (aT._amount === treeBytes) {
      percText = "100.0";
    } else {
      if (!(0 <= aT._amount && aT._amount <= treeBytes)) {
        tIsInvalid = true;
        gUnsafePathsWithInvalidValuesForThisProcess.push(unsafePath);
        reportAssertionFailure("Invalid value for " +
                               flipBackslashes(unsafePath));
      }
      percText = (100 * aT._amount / treeBytes).toFixed(2);
      percText = pad(percText, 5, '0');
    }
    percText = " (" + percText + "%)";

    // For non-leaf nodes, the entire sub-tree is put within a span so it can
    // be collapsed if the node is clicked on.
    let d;
    let hasKids = aT._kids.length > 0;
    let kidsState;
    let showSubtrees;
    if (hasKids) {
      // Determine if we should show the sub-tree below this entry;  this
      // involves reinstating any previous toggling of the sub-tree.
      let safeTreeId = flipBackslashes(aProcess + ":" + unsafePath);
      showSubtrees = !aT._hideKids;
      if (gShowSubtreesBySafeTreeId[safeTreeId] !== undefined) {
        showSubtrees = gShowSubtreesBySafeTreeId[safeTreeId];
      }
      d = appendElement(aP, "span", "hasKids");
      d.id = safeTreeId;
      d.onclick = toggle;
      kidsState = showSubtrees ? kShowKids : kHideKids;
    } else {
      assert(!aT._hideKids, "leaf node with _hideKids set")
      kidsState = kNoKids;
      d = aP;
    }

    appendMrValueSpan(d, tString, tIsInvalid);
    appendElementWithText(d, "span", "mrPerc", percText);

    // We don't want to show '(nonheap)' on a tree like 'smaps/vsize', since
    // the whole tree is non-heap.
    let kind = isExplicitTree ? aT._kind : undefined;
    appendMrNameSpan(d, kind, kidsState, aT._description, aT._unsafeName,
                     tIsInvalid, aT._nMerged);
    appendTextNode(d, "\n");

    // In non-verbose mode, invalid nodes can be hidden in collapsed sub-trees.
    // But it's good to always see them, so force this.
    if (!gVerbose && tIsInvalid) {
      expandPathToThisElement(d);
    }

    if (hasKids) {
      // The 'kids' class is just used for sanity checking in toggle().
      d = appendElement(aP, "span", showSubtrees ? "kids" : "kids hidden");

      for (let i = 0; i < aT._kids.length; i++) {
        // 3 is the standard depth, the callee adjusts it if necessary.
        aIndentGuide.push({ _isLastKid: (i === aT._kids.length - 1), _depth: 3 });

        // Generate the base indent.
        let baseIndentArray = [];
        if (aIndentGuide.length > 0) {
          let j;
          for (j = 0; j < aIndentGuide.length - 1; j++) {
            baseIndentArray.push(aIndentGuide[j]._isLastKid ? " " : kVertical);
            repeatStr(baseIndentArray, " ", aIndentGuide[j]._depth - 1);
          }
          baseIndentArray.push(aIndentGuide[j]._isLastKid ?
                               kUpAndRight : kVerticalAndRight);
          repeatStr(baseIndentArray, kHorizontal, aIndentGuide[j]._depth - 1);
        }

        let baseIndentText = baseIndentArray.join("");
        appendTreeElements2(d, unsafePath + "/", aT._kids[i], aIndentGuide,
                            baseIndentText, tString.length);
        aIndentGuide.pop();
      }
    }
  }

  appendSectionHeader(aPOuter, kTreeNames[aT._unsafeName]);
 
  let pre = appendElement(aPOuter, "pre", "entries");
  appendTreeElements2(pre, /* prePath = */"", aT, [], "", rootStringLength);
  appendTextNode(aPOuter, "\n");  // gives nice spacing when we cut and paste
}

//---------------------------------------------------------------------------

function OtherReport(aUnsafePath, aUnits, aAmount, aDescription, aNMerged)
{
  // Nb: _kind is not needed, it's always KIND_OTHER.
  this._unsafePath = aUnsafePath;
  this._units    = aUnits;
  this._amount = aAmount;
  this._description = aDescription;
  this._asString = this.toString();
}

OtherReport.prototype = {
  toString: function() {
    switch (this._units) {
      case UNITS_BYTES:            return formatBytes(this._amount);
      case UNITS_COUNT:
      case UNITS_COUNT_CUMULATIVE: return formatInt(this._amount);
      case UNITS_PERCENTAGE:       return formatPercentage(this._amount);
      default:
        assert(false, "bad units in OtherReport.toString");
    }
  },

  isInvalid: function() {
    let n = this._amount;
    switch (this._units) {
      case UNITS_BYTES:
      case UNITS_COUNT:
      case UNITS_COUNT_CUMULATIVE: return n < 0;
      case UNITS_PERCENTAGE:       return n < 0; /* percentages may be greater than 100% */
      default:
        assert(false, "bad units in OtherReport.isInvalid");
    }
  }
};

OtherReport.compare = function(a, b) {
  return a._unsafePath < b._unsafePath ? -1 :
         a._unsafePath > b._unsafePath ?  1 :
         0;
};

/**
 * Appends the elements for the "Other Measurements" section.
 *
 * @param aP
 *        The parent DOM node.
 * @param aReportsByProcess
 *        Table of Reports for this process, indexed by _unsafePath.
 * @param aProcess
 *        The process these Reports correspond to.
 * @return The generated text.
 */
function appendOtherElements(aP, aReportsByProcess)
{
  appendSectionHeader(aP, kTreeNames['other']);

  let pre = appendElement(aP, "pre", "entries");

  // Generate an array of Report-like elements, stripping out all the
  // Reports that have already been handled.  Also find the width of the
  // widest element, so we can format things nicely.
  let maxStringLength = 0;
  let otherReports = [];
  for (let unsafePath in aReportsByProcess) {
    let r = aReportsByProcess[unsafePath];
    if (!r._done) {
      assert(r._nMerged === undefined, "dup'd OTHER report");
      let o = new OtherReport(r._unsafePath, r._units, r._amount,
                              r._description);
      otherReports.push(o);
      if (o._asString.length > maxStringLength) {
        maxStringLength = o._asString.length;
      }
    }
  }
  otherReports.sort(OtherReport.compare);

  // Generate text for the not-yet-printed values.
  let text = "";
  for (let i = 0; i < otherReports.length; i++) {
    let o = otherReports[i];
    let oIsInvalid = o.isInvalid();
    if (oIsInvalid) {
      gUnsafePathsWithInvalidValuesForThisProcess.push(o._unsafePath);
      reportAssertionFailure("Invalid value for " +
                             flipBackslashes(o._unsafePath));
    }
    appendMrValueSpan(pre, pad(o._asString, maxStringLength, ' '), oIsInvalid);
    appendMrNameSpan(pre, KIND_OTHER, kNoKids, o._description, o._unsafePath,
                     oIsInvalid);
    appendTextNode(pre, "\n");
  }

  appendTextNode(aP, "\n");  // gives nice spacing when we cut and paste
}

function appendSectionHeader(aP, aText)
{
  appendElementWithText(aP, "h2", "", aText);
  appendTextNode(aP, "\n");
}

//-----------------------------------------------------------------------------
// Code specific to about:compartments
//-----------------------------------------------------------------------------

function onLoadAboutCompartments()
{
  // First generate the page, then minimize memory usage to collect any dead
  // compartments, then update the page.  The first generation step may sound
  // unnecessary, but it avoids a short delay in showing content when the page
  // is loaded, which makes test_aboutcompartments.xul more reliable (see bug
  // 729018 for details).
  updateAboutCompartments();
  minimizeMemoryUsage3x(
    function() { addChildObserversAndUpdate(updateAboutCompartments); });
}

/**
 * Top-level function that does the work of generating the page.
 */
function updateAboutCompartments()
{
  // First, clear the page contents.  Necessary because
  // updateAboutCompartments() might be called more than once due to the
  // "child-memory-reporter-update" observer.
  let body = clearBody();

  let mgr = Cc["@mozilla.org/memory-reporter-manager;1"].
      getService(Ci.nsIMemoryReporterManager);

  let compartmentsByProcess = getCompartmentsByProcess(mgr);
  let ghostWindowsByProcess = getGhostWindowsByProcess(mgr);

  function handleProcess(aProcess) {
    appendProcessAboutCompartmentsElements(body, aProcess,
                                           compartmentsByProcess[aProcess],
                                           ghostWindowsByProcess[aProcess]);
  }

  // Generate output for one process at a time.  Always start with the
  // Main process.
  handleProcess('Main');
  for (let process in compartmentsByProcess) {
    if (process !== "Main") {
      handleProcess(process);
    }
  }

  appendElement(body, "hr");

  let div1 = appendElement(body, "div");
  let a;
  if (gVerbose) {
    let a = appendElementWithText(div1, "a", "option", "Less verbose");
    a.href = "about:compartments";
  } else {
    let a = appendElementWithText(div1, "a", "option", "More verbose");
    a.href = "about:compartments?verbose";
  }
}

//---------------------------------------------------------------------------

function Compartment(aUnsafeName, aIsSystemCompartment)
{
  this._unsafeName          = aUnsafeName;
  this._isSystemCompartment = aIsSystemCompartment;
  // this._nMerged is only defined if > 1
}

Compartment.prototype = {
  merge: function(r) {
    this._nMerged = this._nMerged ? this._nMerged + 1 : 2;
  }
};

function getCompartmentsByProcess(aMgr)
{
  // Ignore anything that didn't come from the "compartments" multi-reporter.
  // (Note that some such reports can reach here as single reports if they were
  // in the child process.)

  function ignoreSingle(aPath) 
  {
    return !aPath.startsWith("compartments/");
  }

  function ignoreMulti(aName)
  {
    return aName !== "compartments";
  }

  let compartmentsByProcess = {};

  function handleReport(aProcess, aUnsafePath, aKind, aUnits, aAmount,
                        aDescription)
  {
    let process = aProcess === "" ? "Main" : aProcess;
    let unsafeNames = aUnsafePath.split('/');
    let isSystemCompartment;
    if (unsafeNames[0] === "compartments" && unsafeNames[1] == "system" &&
        unsafeNames.length == 3)
    {
      isSystemCompartment = true;

    } else if (unsafeNames[0] === "compartments" && unsafeNames[1] == "user" &&
        unsafeNames.length == 3)
    {
      isSystemCompartment = false;
      // These null principal compartments are user compartments according to
      // the JS engine, but they look odd being shown with content
      // compartments, so we put them in the system compartments list.
      if (unsafeNames[2].startsWith("moz-nullprincipal:{")) {
        isSystemCompartment = true;
      }

    } else {
      assert(false, "bad compartments path: " + aUnsafePath);
    }
    let c = new Compartment(unsafeNames[2], isSystemCompartment);

    if (!compartmentsByProcess[process]) {
      compartmentsByProcess[process] = {};
    }
    let compartments = compartmentsByProcess[process];
    let cOld = compartments[c._unsafeName];
    if (cOld) {
      // Already an entry;  must be a duplicated compartment.  This can happen
      // legitimately.  Merge them.
      cOld.merge(c);
    } else {
      compartments[c._unsafeName] = c;
    }
  }

  processMemoryReporters(aMgr, ignoreSingle, ignoreMulti, handleReport);

  return compartmentsByProcess;
}

function GhostWindow(aUnsafeURL)
{
  // Call it _unsafeName rather than _unsafeURL for symmetry with the
  // Compartment object.
  this._unsafeName = aUnsafeURL;

  // this._nMerged is only defined if > 1
}

GhostWindow.prototype = {
  merge: function(r) {
    this._nMerged = this._nMerged ? this._nMerged + 1 : 2;
  }
};

function getGhostWindowsByProcess(aMgr)
{
  function ignoreSingle(aPath) 
  {
    return !aPath.startsWith('ghost-windows/')
  }

  function ignoreMulti(aName)
  {
    return aName !== "ghost-windows";
  }

  let ghostWindowsByProcess = {};

  function handleReport(aProcess, aUnsafePath, aKind, aUnits, aAmount,
                        aDescription)
  {
    let unsafeSplit = aUnsafePath.split('/');
    assert(unsafeSplit[0] == 'ghost-windows',
           'Unexpected path in getGhostWindowsByProcess: ' + aUnsafePath);

    let unsafeURL = unsafeSplit[1];
    let ghostWindow = new GhostWindow(unsafeURL);

    let process = aProcess === "" ? "Main" : aProcess;
    if (!ghostWindowsByProcess[process]) {
      ghostWindowsByProcess[process] = {};
    }

    if (ghostWindowsByProcess[process][unsafeURL]) {
      ghostWindowsByProcess[process][unsafeURL].merge(ghostWindow);
    }
    else {
      ghostWindowsByProcess[process][unsafeURL] = ghostWindow;
    }
  }

  processMemoryReporters(aMgr, ignoreSingle, ignoreMulti, handleReport);

  return ghostWindowsByProcess;
}

//---------------------------------------------------------------------------

function appendProcessAboutCompartmentsElementsHelper(aP, aEntries, aKindString)
{
  // aEntries might be null or undefined, e.g. if there are no ghost windows
  // for this process.
  aEntries = aEntries ? aEntries : {};

  appendElementWithText(aP, "h2", "", aKindString + "\n");

  let uPre = appendElement(aP, "pre", "entries");

  let lines = [];
  for (let name in aEntries) {
    let e = aEntries[name];
    let line = flipBackslashes(e._unsafeName);
    if (e._nMerged) {
      line += ' [' + e._nMerged + ']';
    }
    line += '\n';
    lines.push(line);
  }
  lines.sort();

  for (let i = 0; i < lines.length; i++) {
    appendElementWithText(uPre, "span", "", lines[i]);
  }

  appendTextNode(aP, "\n");   // gives nice spacing when we cut and paste
}

/**
 * Appends the elements for a single process.
 *
 * @param aP
 *        The parent DOM node.
 * @param aProcess
 *        The name of the process.
 * @param aCompartments
 *        Table of Compartments for this process, indexed by _unsafeName.
 * @param aGhostWindows
 *        Array of window URLs of ghost windows.
 *
 * @return The generated text.
 */
function appendProcessAboutCompartmentsElements(aP, aProcess, aCompartments, aGhostWindows)
{
  appendElementWithText(aP, "h1", "", aProcess + " Process");
  appendTextNode(aP, "\n\n");   // gives nice spacing when we cut and paste

  let userCompartments = {};
  let systemCompartments = {};
  for (let name in aCompartments) {
    let c = aCompartments[name];
    if (c._isSystemCompartment) {
      systemCompartments[name] = c;
    }
    else {
      userCompartments[name] = c;
    }
  }
  
  appendProcessAboutCompartmentsElementsHelper(aP, userCompartments, "User Compartments");
  appendProcessAboutCompartmentsElementsHelper(aP, systemCompartments, "System Compartments");
  appendProcessAboutCompartmentsElementsHelper(aP, aGhostWindows, "Ghost Windows");
}

